Print Page - How Easy To Remove The Door Panels?

Title: How Easy To Remove The Door Panels?
Post by: Anonymous on August 3, 2005, 14:37

The Speakers in the front sound like they have bust and i'm thinking about replacing them, looking for the following info:

How do I remove the panel?

What size of speaker fits straight in where the old ones come out?

Not looking for anything fancy, just a straight swap

Daz

Title:
Post by: Anonymous on August 3, 2005, 14:40

See here (http://www.spydermagazine.com/2000/Sept/doorpanel/doorpanels.htm) on how to remove the door panels.

Stock speaker size is 16.5 cm, so anything that size will fit, but be warned you'll probably have to make up a spacer for the speaker so that it clears the window when down. I heartily recommend Focals for replacements, they're a cheap but well worthwhile upgrade. Imho, obviously. s:wink: :wink: s:wink:

Title:
Post by: kanujunkie on August 3, 2005, 14:49

go for Rainbows, better sound and cheaper, wish i'd bought them when i got my speakers

takes about 3mins per door to remove the trim BTW

Title:
Post by: Anonymous on August 3, 2005, 16:05

Quote from: "kanujunkie"go for Rainbows, better sound and cheaper, wish i'd bought them when i got my speakers

takes about 3mins per door to remove the trim BTW

Good choice I have Crystal and they are wayy too harsh. I want a set of rainbows next.

Title:
Post by: heathstimpson on August 11, 2005, 15:56

Or Boston acoustics if you have a little more to spend s:wink: :wink: s:wink:

MR2 Roadster Owners Club

The Workshop => Audio / Security / Electrical => Topic started by: Anonymous on August 3, 2005, 14:37