Print Page - frt member brace ????

Title: frt member brace ????
Post by: Anonymous on August 5, 2005, 22:04

just recieved my frt brace but before i fit, do you need to get the car re-tracked after fitting or should it be ok???

Title:
Post by: markiii on August 5, 2005, 22:04

if your talking about the H brace, the no you won't affect the tracking at all.

Title:
Post by: Anonymous on August 5, 2005, 22:08

cheers markii that was a bloody quick answer.
yes its the h one.
thats good cause i just paid for a laser track and didnt fancy paying again.
thats one job to do sunday then. s:D :D s:D

Title:
Post by: markiii on August 5, 2005, 22:11

take your time with it as the bolts can be a sod to get in square, if you cross thread them they will snap, so go gentle,

and make sure you have the entire front of the car in the air, if you have to jack it up, one side won't do.

Title:
Post by: Anonymous on August 5, 2005, 22:14

ok cheers.
i have got to be careful jacking it up as i have just put my side skirts on so i might see if my local garage might help.
do the bolts need a torque setting when tightening them up???

Title:
Post by: markiii on August 5, 2005, 23:27

they do, I'll take a look

Title:
Post by: markiii on August 5, 2005, 23:29

this should help

m http://www.spydermagazine.com/2002/May/ ... braces.htm (http://www.spydermagazine.com/2002/May/memberbrace/braces.htm) m

Title:
Post by: Anonymous on August 5, 2005, 23:37

cheers markii.

MR2 Roadster Owners Club

The Workshop => Performance Related => Topic started by: Anonymous on August 5, 2005, 22:04