Hi im strugling a bit trying to get the bit of facia back on.
(http://www.mr2roc.org/Repository/misc/articles/41/pic5.jpg)
After instaling an aftermarket stereo, the top doesnt seem to want to go back in proprly.
Any tips or techniques? im worried to force anything.
Thanks,
Philster
Strange - it should just clip in nicely before you screw it down. The top clips on the side are sometimes a bit tight but will click in place with a firm even push if there is nothing in the way....but don't force it if you think something is in the way!
I can think of one possible source of snagging to check - The light feed to your fan slider is via a small piece of shaped perspex that sits between the forks of the lever (the front edge of which sticks through your knob s:shock: :shock: s:shock: ).
Check that this isn't dangling & getting in the way (the perspex that is, not yer knob s:wink: :wink: s:wink: ).
its somewhere in that area or by the word passenger but cant see what.
Ill try again tomorow.
Thanks,
Phil
I found the fan slider got in the way a bit, there's a little white clip on it than can get damaged if you're not careful. I think you have to make sure this is 100% pushed on.
(If I remember rightly!)
I had the same problem last week. It was the plastic dangling from the slider. Make sure it is flush and horizontal with the lever and it has clicked into place.