Print Page - need shifter pivot cup!

Title: need shifter pivot cup!
Post by: Anonymous on September 26, 2005, 22:51

does anyone know where I can get the little white plastic thing that has the ball bearing in it that goes on the shifter? i messed mine up installing my Fidanza short throw.

Title:
Post by: kanujunkie on September 26, 2005, 23:13

MR.T???

Title:
Post by: markiii on September 26, 2005, 23:15

nice one stu,

now all you need is to answer these

m http://www.mr2roc.org/phpBB2/viewtopic. ... highlight= (http://www.mr2roc.org/phpBB2/viewtopic.php?t=8528&highlight=) m
m http://www.mr2roc.org/phpBB2/viewtopic. ... highlight= (http://www.mr2roc.org/phpBB2/viewtopic.php?t=8527&highlight=) m
m http://www.mr2roc.org/phpBB2/viewtopic. ... highlight= (http://www.mr2roc.org/phpBB2/viewtopic.php?t=8525&highlight=) m
m http://www.mr2roc.org/phpBB2/viewtopic. ... highlight= (http://www.mr2roc.org/phpBB2/viewtopic.php?t=8524&highlight=) m

s:D :D s:D

Title:
Post by: kanujunkie on September 26, 2005, 23:22

good luck s:wink: :wink: s:wink:

Title:
Post by: Anonymous on September 27, 2005, 00:48

mr. t only sells the whole shifter which is either $148 or $348. i forog twhich one but i could buy a whole new TRD shifter for that. any advice?

sorry i've got alot of stuff s:roll: :roll: s:roll:

Title:
Post by: Tem on September 27, 2005, 05:48

Quote from: "mefarri"mr. t only sells the whole shifter which is either $148 or $348. i forog twhich one but i could buy a whole new TRD shifter for that. any advice?

It's not really a part that wears out so people would need replacements, so it's very VERY unlikely that anyone else would be selling those. I'm afraid you have to buy the whole thing, unless you can get a used one.

Title:
Post by: Anonymous on September 27, 2005, 06:51

im thinking about calling B&M.

Title:
Post by: heathstimpson on September 27, 2005, 07:44

Quote from: "mefarri"I'm thinking about calling B&M.

That's your best bet as they may let you have one if you explain your predicament s:wink: :wink: s:wink:

Title:
Post by: Jap GT300 on September 27, 2005, 08:16

I have a complete shifter cage available if you still need it.

Title:
Post by: roger on September 27, 2005, 09:55

Quote from: "Jap GT300"I have a complete shifter cage available if you still need it.

The bit needed is actually "part of" the gear stick. I noticed the B&M stick comes with them on. Maybe they can supply...or rant and rave when you explain you didn't want buy their expensive one s:wink: :wink: s:wink:

I can confirm MrT doesn't supply. Only the cage and gearshifter as one complete assembly. I asked before I did mine, wanted a couple of spares, just in case, so under the circumstances I went particularly carefully.

Title:
Post by: Jap GT300 on September 27, 2005, 16:23

The cage I have is complete with stick and mechanism. I don't know if it is of any help?

Title:
Post by: Anonymous on September 27, 2005, 19:27

you know i don't need th cage, but how much just for the shifter?

MR2 Roadster Owners Club

The Workshop => Maintenance, Problems & Troubleshooting => Topic started by: Anonymous on September 26, 2005, 22:51