Guys,
Over the eyars there have been many discussione regarding this, and so I decided it was worth getting a definative answer;
I have phoned Eibach, and confirmed that they are Linear Springs. I'll post the spring rates as soon as I can find my notes.
Next I contacted TTE to get teh specs of their springs
And was told;
MR2 (W3) springs are linear both front and rear. Spring rate FR C=17N/mm, RR C=27,5N/mm
So there you have it, I'm not sure why we started beleiving that one was linear and teh other progressive but it seems both are linear.
Do you still need to see one of mine ? i could bring one to dinner s8) 8) s8)
I thought that the TTE springs are made by Eibach! Hmmm....
I wouldn't be surprised if their numbers match TTEs'.
TTE are made by eibach, biut we've been debating for ages if they wewre teh same and concluded not as one was known ro be progressive.
Phil, if you have it handy then go for it. If not don't go digging it out as I thik I've got it resolved now.
there was a table of rateings around somewhere, but i cant remember if it was here or SC or IMOC
seem to remember the one your on about stu, but it didn't include teh TTE
sure one of them did, i've found the waydo trd tein one, but its not the table i've got in mind
Where's mefarri when you need him, he sure was clued up about lowering springs. He'd of cleared all this up s:roll: :roll: s:roll: s:wink: :wink: s:wink:
s:lol: :lol: s:lol: s:lol: :lol: s:lol: s:lol: :lol: s:lol:
He's busy organizing a GB s:shock: :shock: s:shock:
m http://www.spyderchat.com/phpBB/viewtopic.php?t=28187 (http://www.spyderchat.com/phpBB/viewtopic.php?t=28187) m
s:lol: :lol: s:lol:
Mark, haven't yet got my TTE from James, so no joy yet on your photo request. Perhaps you can ask him since its taking him a bit of time to wrap them all up s:cry: :cry: s:cry:
yikes, be quicker to fetch them