wheel advice.....think i've been done !

Started by Prolex-UK, July 24, 2007, 18:13

0 Members and 1 Guest are viewing this topic.

Prolex-UK

bought some OZ anniversarys for the roadster,,,,,,,,,,,

came y/day

asked for 16's

got 16's 7j

BUT all four are 205/45 i see from the car with OEM wheels that rears are 215 fronts 185

guy knew what the car was and told me these were correct sizes (didnt know oem sizes at the time   s:oops: :oops: s:oops:  )

question is is the new set up OK or should i get bigger rears from them ??
Fiat 500 Abarth Essesse 2010 182 bhp  lovely car !!
TOM\'s IS350 compressor 378 bhp 170 mph and still pulling on autobahn (sold :-) )
http://www.prolex-uk.com

Anonymous

#1
Definitely get bigger rears, else a ditch may sneak up on you and surprise you in a not-very-nice way. I wouldn't even drive an MR2 on same-size tyres all round for even a mile, such was my horribly bad experience with them like that.

Prolex-UK

#2
my initial thoughts.

am pee'd off as they are supposed to be one of the biggest/best suppliers in the UK
Fiat 500 Abarth Essesse 2010 182 bhp  lovely car !!
TOM\'s IS350 compressor 378 bhp 170 mph and still pulling on autobahn (sold :-) )
http://www.prolex-uk.com

Anonymous

#3
Tbh I'd send them an e-mail stating that the MR2 is a mid-engined car and as such they should know that it needs to have staggered tyres, and ask them what they want to do about it. Either way Dave I honestly wouldn't drive it with them on mate, especially not in the varying weather we've got atm.

Prolex-UK

#4
will take them back on friday on my way to bonnie scotland. may well take a shotgun as well
Fiat 500 Abarth Essesse 2010 182 bhp  lovely car !!
TOM\'s IS350 compressor 378 bhp 170 mph and still pulling on autobahn (sold :-) )
http://www.prolex-uk.com

Anonymous

#5
 s:lol: :lol: s:lol:

Prolex-UK

#6
what annoys me is they have agreed to sell me wheels etc.......so if someon here orders from me they'd get the same.........truly one grumpy old man
Fiat 500 Abarth Essesse 2010 182 bhp  lovely car !!
TOM\'s IS350 compressor 378 bhp 170 mph and still pulling on autobahn (sold :-) )
http://www.prolex-uk.com

Anonymous

#7
Quote from: "Prolex-UK"will take them back on friday on my way to bonnie scotland. may well take a shotgun as well

Where in Scotland Dave?

Prolex-UK

#8
i'm doing the time attack at knockhill on 28/7.

actual place is rochford tyres down sarth
Fiat 500 Abarth Essesse 2010 182 bhp  lovely car !!
TOM\'s IS350 compressor 378 bhp 170 mph and still pulling on autobahn (sold :-) )
http://www.prolex-uk.com

Liz

#9
Pity you didn't check out the feedback section on here..

 m http://www.mr2roc.org/phpBB2/viewtopic. ... ford+tyres m

I too had problems with them - they refurbished wheels for me and stuck them in my passenger seat when I went to collect them, they looked surprised when I wanted them on the car!
ex-TTE Turbo, now Freelander Sport, its not a car its a Landrover!

Prolex-UK

#10
mmmm

may be a cruise missile i send then
Fiat 500 Abarth Essesse 2010 182 bhp  lovely car !!
TOM\'s IS350 compressor 378 bhp 170 mph and still pulling on autobahn (sold :-) )
http://www.prolex-uk.com

Prolex-UK

#11
TOM's do a set for the MRS................7j and 195.45 all round..........am mystified
Fiat 500 Abarth Essesse 2010 182 bhp  lovely car !!
TOM\'s IS350 compressor 378 bhp 170 mph and still pulling on autobahn (sold :-) )
http://www.prolex-uk.com

Anonymous

#12
these are the company i have just dealt with.
they dont know what tyre sizes are suitable for our cars, i had a right game tring to tell them that 225/35's are the best fit for 17" and then after they took the finance for the wheels they decided to tell me that they could not supply them till november.as if that wasnt enough they still have not cancelled the finance agreement as requested over 1 month ago.
never dealing with them again.

Prolex-UK

#13
if you hear a loud bang in essex................that'll be me
Fiat 500 Abarth Essesse 2010 182 bhp  lovely car !!
TOM\'s IS350 compressor 378 bhp 170 mph and still pulling on autobahn (sold :-) )
http://www.prolex-uk.com

firepower

#14
a lot of wheel and tyre dealers supply the same size all round for the mr2 when they do these package wheel and tyre deals and although they may be technically the correct sizes and can legally be driven on the road they do not have that element of safety built in that you get with staggared sizes , and most members would agree that they would be worried about driving a 2 with same size all round because the rear will loose grip at the same time as the front and with the mid engine bias round you go   s:shock: :shock: s:shock:  
with more grip at the rear the front will start to push wide as the narrower front tyres loose grip giving you the warning to ease up  s:) :) s:)
01 tte turbo, sp exhaust and down pipe, tte springs 190hp more power soon ? 205lb/ft
1/4 mile 14.6 s @ 90 .55 mph  ( at drag strip )

Prolex-UK

#15
hoping they will be able to fit 215's on the 7j instead of the 205's will be happyish then
Fiat 500 Abarth Essesse 2010 182 bhp  lovely car !!
TOM\'s IS350 compressor 378 bhp 170 mph and still pulling on autobahn (sold :-) )
http://www.prolex-uk.com

Tags: