EML & Exhaust

Started by conrank, July 30, 2018, 03:35

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 2
User actions

Ardent

#25
July 31, 2018, 19:03
Im chuffed your chuffed. As that is all that matters.

Your mech will be chuffed at what the hourly rate works out at.
Even if part was 70. £30 to unclip connector, screw out old sensor, screw in new sensor, plug connector back in.

paulj

#26
July 31, 2018, 20:03
Additional bonus, you haven't bought a O2 socket which would sit in the "tools I only used once" box.....
Today
2000 x reg pfl - blue - as original no mods
In the late 1980's
1982 x reg Toyota Corolla Liftback Coupe (also blue)
1978 s reg Mitsubishi Celeste Coupe (yellow)

conrank

#27
July 31, 2018, 23:10
Quote from: Ardent on July 31, 2018, 19:03
Im chuffed your chuffed. As that is all that matters.

Your mech will be chuffed at what the hourly rate works out at.
Even if part was 70. £30 to unclip connector, screw out old sensor, screw in new sensor, plug connector back in.

Thanks mate :)
Black on Black 2003 MK3

conrank

#28
July 31, 2018, 23:11
Quote from: paulj on July 31, 2018, 20:03
Additional bonus, you haven't bought a O2 socket which would sit in the "tools I only used once" box.....

Very very true. And I now have an OBD2 reader also.
Black on Black 2003 MK3

Ardent

#29
July 31, 2018, 23:46
That you will use again.

Connected to your phone so you can monitor your new sensor, doing its thing.
.8 .3 .5 .3 .8 .5 .3.4 .5 .8
Print
Go Up Pages 1 2
User actions