Lotus Exige S2 remap for MR2 2zz?

Started by JB21, September 15, 2019, 12:47

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

JB21

September 15, 2019, 12:47
Would a Lotus remap for the Exige S2 2ZZ work on the a Celica 2ZZ engine and ECU rsn in the Roadster or do lotus run a different ECU?

Link to Exige map...

http://www.jrtuning.co.uk/remap-tuning-files/viewdetails.php?make=Lotus&model=Exige&modelyear=All&engine=1.8+192hp

1979scotte

#1
September 15, 2019, 13:12
Can't remap 1zz or 2zz ecu.

That's why we all end up using piggybacks or standalone
First they came for the socialists, and I did not speak out—because I was not a socialist.
Then they came for the Jews, and I did not speak out—because I was not a Jew.
Then they came for me—and there was no one left to speak for me.

Free Ukraine 🇺🇦

jonbill

#2
September 15, 2019, 18:51
Quote from: 1979scotte on September 15, 2019, 13:12Can't remap 1zz or 2zz ecu.

That's why we all end up using piggybacks or standalone
Can't remap a Toyota 1zz/2zz ecu. Presumably Lotus used a different ecu and so people have cracked and remapped it.
But that won't help you in a Toyota!

shnazzle

#3
September 15, 2019, 19:36
And it's likely a DBW. So no good for us. Not a denso ecu, entirely different.
...neutiquam erro.

m1tch

#4
September 16, 2019, 07:56
I have a couple of remaps for the PFC for the 2zz if anyone is after any.

JB21

#5
September 16, 2019, 09:51
Quote from: m1tch on September 16, 2019, 07:56I have a couple of remaps for the PFC for the 2zz if anyone is after any.

I'll give you a shout mate if I can ever find a used PFC, as £1000 for a new one is not going to happen.

Do these maps lower the lift point?
Print
Go Up Pages1
User actions
Tags: